K-STRIP is a powerful floor stripper agent for removing water-based floor finishes.Part of the KEMSOL K Floor care system this product quickly removes K-Gloss and other floor finishes. The low odour formulation can be used with comfort and is easy to dilute and handle. DIRECTIONS Use at a ratio of 1:5-1:2 (20-50% soln, 200ml to 500ml per ltr) with hot potable water. Apply solution liberally to polished floor using a mop. Allow solution to soak for 5-10 minutes. Ensuring slurry is kept wet, reapply solution as required. Allow longer soak periods if cold water is used, or for areas with a heavy build up of polish. Scrub floor using a scrubbing machine and a heavy duty scrubbing pad. Thoroughly pick up solution using a clean mop or wet and dry vacuum cleaner. Ensure solution is completely removed. Use a clean damp mop and fresh water to remove any residue. Allow...

K-GLOSS is a metal cross-linked floor polish. It gives durability, superior wet look gloss finish and is easy to use. It flows evenly and levels quickly to dry to a lustrous gloss. Subsequent coats apply smoothly without drag, pulling, streaking or clouding. It resists surface scuffs, black heel marks and soil penetration, allowing extended periods between maintenance.Suitable for use where slip resistance is required. Expect a long wearing finish when used in high speed burnishing programs as well as in conventional maintenance programs.The quick-drying formulations allows multiple coats to be applied in short periods of time. 1LTR does one coat of 100sq metres. 4 LTRS would do 100 square metres of 4 X thin/reasonable coats. DIRECTIONS Step 1: Apply to a clean neutral prepared floor by stripping old polish. We recommend the use of KEMSOL K-STRIP. Step 2: Using a clean finish mop or applicator, apply 3 or 4 coats...

K-SLIK is a highly dilutable neutral detergent suitable for cleaning hard surfaces especially those coated in protectant or floor polish.Polished surfaces simply cannot afford high pH cleaners due to their “stripping” characteristics - making neutral K-SLIK the perfect solution for expensive, high finish floors. DIRECTIONS For most general wet mopping applications use at a ratio of 1:50 (2% soln, 20mls per litre) with potable water. May be diluted stronger or weaker depending on the level of soiling and sensitivity of floor coating.