Formulated as an environmentally safe alternative to solvent based and non-biodegradable water based cleaning systems. Effectively on oils, grease and other hard surface soiling. Solids are suspended until flushed into holding tanks, separator pits or settling ponds where separation occurs to form distinct water and oil layers allowing easy removal of unwanted contamination from discharge water.
Spot cleaning
Use undiluted on oil and grease spots. Scrub affected areas as required and rinse with water.
Full floor coverage
Use at a ratio of 1:20 - 1:10 (5-10% soln, 50-100ml per litre) with potable cold water. Sweep or brush area prior to hosing off.
Water blaster
Use a 5% solution applied at low pressure and remove by blasting off at high pressure.
Plant and Machinery
Use at a ratio best determined for the job at a 10-20% solution and rinse off.